hello, i am buying two rockford fosgate subwoofers (Rockford Fosgate P210D4)

Injection Molded Parabolic Polypropylene Cone
2" Aluminum Voice Coil Former
60oz Double Stacked Motor Structure
Optimized for Small Sealed and Vented Enclosures
250 Watts RMS/500 Watt Peak
Mounting Depth 5.6"

i am going to hook it up to this amp(Pyramid PB738GX )

500 Watts x 2 Output
1000 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
Power ON LED Indicator
Protection LED Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Blue Light Illumination Top Cover
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
Dimensions: 2.4′ H x 10.8′W x 12′ L
Pyramid 1-Year Warranty

i was wondering what the best way to wire them would be, series, parallel, or bridged. could you please tell me which one would be the best, and exactly how to wire it.
thank you very much

LEGACY 2000 WATT 2/1 CHANNEL CAR STEREO AMPLIFIER AMP
1000 Watts x 2 Output
2000 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
MOSFET PWM Power Supply
Power ON LED Indicator
LED Protection Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Blue Color LED Illuminated
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
Dimensions: 2.32' H x 12.32' W x 17' L
600W RMS

'08 KIcKER SoLoBARIC 15" L7 SUBWOOFER Subs Sub Solo
2000 watts max power handling
1000 Watts RMS power handling
89.4 DB sensitivity
frequency response: 18 – 100 K
mounting depth: 8 11/16
cut out diameter: 13-3/4
sealed box volume: 1.5 – 6.00 cubic feet
vented box 3 – 6 cubic feet
Square design gives more surface area than a normal round sub (this will sound like an 15" round sub)
Solokon 1 piece cone
Cast aluminum basket
Santoprene rubber surrounds
High Temperature Coils (this sub will never ever burn out!)

I have 1 15" Kicker Solo baric sub
2000 watts max power handling
1000 Watts RMS power handling
89.4 DB sensitivity
frequency response: 18 – 100 K
mounting depth: 8 11/16
cut out diameter: 13-3/4
sealed box volume: 1.5 – 6.00 cubic feet
vented box 3 – 6 cubic feet
Square design gives more surface area than a normal round sub (this will sound like an 15" round sub)
Solokon 1 piece cone
Cast aluminum basket
Santoprene rubber surrounds
High Temperature Coils

LEGACY LA2088 2400 WATT 2/1 CHANNEL
1200 Watts x 2 Output
2400 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
MOSFET PWM Power Supply
Power ON LED Indicator
LED Protection Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Illuminated Top Panel
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
800-1200 rms wattage

DO YOU THINK ILL NEED A CAPACITOR?

The details are:

# 4x100W+2x250W RMS at 4 Ohms
# 4x250W+2x500W MAX at 4 Ohms
# 2x400W+1x900W MAX at 4 Ohms Bridged
# 4x175W+1x400W RMS at 2 Ohms
# Electronic Crossover Network
# Bass Boost Circuit
# Bridgeable at 4 Ohms
# 2 Ohm Stereo Stable
# Tri-Mode Capable
# Gold Plated RCA Inputs
# Line Outs for 1 and 2 Channel
# Low Pass Filter Control
# High Pass Filter Control
# Remote Bass Level Control
# Power and Protection LED Indicators
# Red Lighting Illumination
# Side Leg Mounting
# THD: <0.04%.
# S/N Ratio: >90dB
# Input Sensitivity : 100mV ~4V
# Channel Separation : >65dB
# Freq. Response : 10Hz ~ 30KHz
# Patent Pending
# Soft Turn-on/Turn-off
# Dimensions : 8.6''(W) x 2.74''(H) x 19.7''(L)

I have 2- 5.25"—-200 Watts (Each) 400 Watts total RMS

2-6X9————— 350 Watts (Each) 700 watts total RMS

2-10inch Sub woofers—max power=750 watts, RMS= 150 RMS watts
Voice coil diameter: 2"
4ohm inpedance

here are the subs im getting…

12″ 2200W Dual 2-Ohm Subwoofer (2)
here are the specs…
Sensitivity: 88 dB
RMS Power Range : 1100 Watts
Peak Power Handling: 2200 Watts
Impedance: Dual 2 Ohm
Low Frequency response: 26 Hz
High Frequency Response: 800 Hz
Diameter: 12 Inch

The amp i looked at was this…

4000 Watt 2 Channel High Power MOSFET Amplifier
here are the specs…
RMS Power Range : 1000-2000 Watts
Number Of Channels: 2
Maximum Power: 4000 Watts
Low Frequency response: 15 Hz
High Frequency Response: 35000 Hz
Built In Crossovers: Yes
Channel Separation: Yes

Features
2 x 1000 Watts RMS at 4 Ohms
2 x 2000 Watts Max at 4 Ohms
1 x 4000 Watts Max at 4 Ohms Bridged
2 x 1650 Watts at 2 Ohms RMS
Electronic Crossover Network
Bass Boost Circuit
Variable Phase Shift Control
2 Ohms Stereo Stable
Anti-Thump Turn-On
Soft Turn On/Off
High & Low Level Inputs
Blue Light Illuminated Crossover Control
Power & Protection LED Indicators
Advanced Protection Circuitry
Bass Boost Remote Control
T.H.D: 0.04%
S/N Ratio: 90dB
Channel Separation: 65dB
Frequency Response: 15Hz- 35kHz
Dimensions: 10.47″W x 2.46″H x 21″L

i mean people have said it will push them good, could i do better, i was thinkin that amp should deff power the hell out of those subs. i wanna go with class d mono, but i dunno which size would go good with it, any suggestions