Circuit Electronics » timer http://www.circuitelectronics.info Electronic Circuit Design, Repair, Software, Components & Theory Wed, 28 Jul 2010 01:38:06 +0000 http://wordpress.org/?v=2.9.2 en hourly 1 where can i get a circuit that delays input current by about half a second? http://www.circuitelectronics.info/electronic-timer-circuit/where-can-i-get-a-circuit-that-delays-input-current-by-about-half-a-second/ http://www.circuitelectronics.info/electronic-timer-circuit/where-can-i-get-a-circuit-that-delays-input-current-by-about-half-a-second/#comments Wed, 28 Jul 2010 01:38:06 +0000 admin http://www.circuitelectronics.info/electronic-timer-circuit/where-can-i-get-a-circuit-that-delays-input-current-by-about-half-a-second/ i want a circuit to delay the power on time of 12v circuit for half a second so that after half a second of delay the power steadly goes the way.
If precise time can not be attained, the timer may be adjustable so that i could adjust it by using knob. I am not an engineer or electronic professional. it should be simple "do it yourself" project

]]> http://www.circuitelectronics.info/electronic-timer-circuit/where-can-i-get-a-circuit-that-delays-input-current-by-about-half-a-second/feed/ 2 Electronic component help? http://www.circuitelectronics.info/electronic-timer-circuit/electronic-component-help/ http://www.circuitelectronics.info/electronic-timer-circuit/electronic-component-help/#comments Fri, 27 Nov 2009 11:13:57 +0000 admin http://www.circuitelectronics.info/electronic-timer-circuit/electronic-component-help/ Im newbie with electronic components but is there like a timer component for an electric circuit which like you can control how long current is allowed to flow?

]]> http://www.circuitelectronics.info/electronic-timer-circuit/electronic-component-help/feed/ 2 How do i figure out how many volts my electronic circuit will take.? http://www.circuitelectronics.info/electronic-timer-circuit/how-do-i-figure-out-how-many-volts-my-electronic-circuit-will-take/ http://www.circuitelectronics.info/electronic-timer-circuit/how-do-i-figure-out-how-many-volts-my-electronic-circuit-will-take/#comments Fri, 30 Oct 2009 06:38:26 +0000 admin http://www.circuitelectronics.info/electronic-timer-circuit/how-do-i-figure-out-how-many-volts-my-electronic-circuit-will-take/ Okay im trying to make what my uncle did in high school he made a buzz bomb where you used resisters and capiciters in a series to make a timer connected to a buzzer a switch and a battery. I have a 4m ohm resister and a 15 uf capiciter.

]]> http://www.circuitelectronics.info/electronic-timer-circuit/how-do-i-figure-out-how-many-volts-my-electronic-circuit-will-take/feed/ 1 How to make a timer circuit? http://www.circuitelectronics.info/electronic-circuit-designs/how-to-make-a-timer-circuit-2/ http://www.circuitelectronics.info/electronic-circuit-designs/how-to-make-a-timer-circuit-2/#comments Thu, 23 Jul 2009 02:04:27 +0000 admin http://www.circuitelectronics.info/electronic-circuit-designs/how-to-make-a-timer-circuit-2/ http://www.elecfree.com/electronic/wp-content/uploads/2007/11/lm555powerdelay.gif

Using either of the top two circuits, how do I make a shut off timer? I Built the second one and it works perfectly but with my design I don’t want any power flowing. So when the relay activates to shut down it’s own power supply all it will do is reset itself and turn into an oscillator, right?

How do I do this so that the power stays off.

Thanks,
Jake

]]> http://www.circuitelectronics.info/electronic-circuit-designs/how-to-make-a-timer-circuit-2/feed/ 1 How to make a timer circuit? http://www.circuitelectronics.info/electronic-timer-circuit/how-to-make-a-timer-circuit/ http://www.circuitelectronics.info/electronic-timer-circuit/how-to-make-a-timer-circuit/#comments Wed, 22 Jul 2009 23:23:15 +0000 admin http://www.circuitelectronics.info/electronic-timer-circuit/how-to-make-a-timer-circuit/ http://www.elecfree.com/electronic/wp-content/uploads/2007/11/lm555powerdelay.gif

Using either of the top two circuits, how do I make a shut off timer? I Built the second one and it works perfectly but with my design I don’t want any power flowing. So when the relay activates to shut down it’s own power supply all it will do is reset itself and turn into an oscillator, right?

How do I do this so that the power stays off.

Thanks,
Jake

]]> http://www.circuitelectronics.info/electronic-timer-circuit/how-to-make-a-timer-circuit/feed/ 1 I have a quick question about a delay circuit.? http://www.circuitelectronics.info/electronic-circuit-diodes/i-have-a-quick-question-about-a-delay-circuit/ http://www.circuitelectronics.info/electronic-circuit-diodes/i-have-a-quick-question-about-a-delay-circuit/#comments Sun, 31 May 2009 09:32:46 +0000 admin http://www.circuitelectronics.info/?p=240 Hey, i am a fire alarm lover. My control panel is homeade using a 160 in one electronic kit. I have 1 bell and strobe, 3 pull boxes.

I have a latchning circuit created using a relay. But i want to create a delay circuit. (All pull boxes work with the latching circuit)

I have been told to use a 555 timer but at this time i dont have a breadboard or the timer. I herd i could use a capaciter and resister, but cant figure out how to wire it up.

I have capacicters, resisters, transisters, diodes etc.. all on the board (kit) i can use.

What i want is to have it so when any of the intiating devices are activated such as pull stations, it has a 1-3 second delay before the relay actives and then activates the alarm.

Anybody that knows how to help me would be greatly appreciated.

Thanks so much, Chris.

]]> http://www.circuitelectronics.info/electronic-circuit-diodes/i-have-a-quick-question-about-a-delay-circuit/feed/ 1 project for electronic device and application? http://www.circuitelectronics.info/electronic-timer-circuit/project-for-electronic-device-and-application/ http://www.circuitelectronics.info/electronic-timer-circuit/project-for-electronic-device-and-application/#comments Sun, 31 May 2009 05:09:40 +0000 admin http://www.circuitelectronics.info/?p=224 i have to some project for this subject..but still didnt know which topic is better..my lecturer ask me to build a simple circuit/system that will make use at least one of these electronic elements -

Op-amp
Feedback system
Voltage regulator
Oscillator
555 Timer
Power amplifier

the project must include this criteria
1)Introduction/Abstract
2)Objective
3)List of the components used
4)Circuit ( graphic diagram or block diagram)
5)Explanation of the system (circuit operation)
6)Results (calculations, simulations and etc.)
7)Discussion & Conclusion
8)References

so,i just need an idea which topic is better and where the link that i can refer to..all your kindness will appreciate..thanks..

]]> http://www.circuitelectronics.info/electronic-timer-circuit/project-for-electronic-device-and-application/feed/ 1 How can i create a delay circuit without using the 555 or 556 timers, only using resisters, capaciters etc…? http://www.circuitelectronics.info/electronic-timer-circuit/how-can-i-create-a-delay-circuit-without-using-the-555-or-556-timers-only-using-resisters-capaciters-etc/ http://www.circuitelectronics.info/electronic-timer-circuit/how-can-i-create-a-delay-circuit-without-using-the-555-or-556-timers-only-using-resisters-capaciters-etc/#comments Sat, 30 May 2009 03:25:06 +0000 admin http://www.circuitelectronics.info/?p=201 Hey, i am a fire alarm lover. My control panel is homeade using a 160 in one electronic kit. I have 1 bell and strobe, 3 pull boxes.

I have a latchning circuit created using a relay. But i want to create a delay circuit. (All pull boxes work with the latching circuit)

I have been told to use a 555 timer but at this time i dont have a breadboard or the timer. I herd i could use a capaciter and resister, but cant figure out how to wire it up.

I have capacicters, resisters, transisters, diodes etc.. all on the board (kit) i can use.

What i want is to have it so when any of the intiating devices are activated such as pull stations, it has a 1-3 second delay before the relay actives and then activates the alarm.

Anybody that knows how to help me would be greatly appreciated.

Thanks so much, Chris.

]]> http://www.circuitelectronics.info/electronic-timer-circuit/how-can-i-create-a-delay-circuit-without-using-the-555-or-556-timers-only-using-resisters-capaciters-etc/feed/ 2 whirlpool gold refrigerator: It has a circuit board defrost timer! Ho do you make it got into defrost? http://www.circuitelectronics.info/electronic-timer-circuit/whirlpool-gold-refrigerator-it-has-a-circuit-board-defrost-timer-ho-do-you-make-it-got-into-defrost/ http://www.circuitelectronics.info/electronic-timer-circuit/whirlpool-gold-refrigerator-it-has-a-circuit-board-defrost-timer-ho-do-you-make-it-got-into-defrost/#comments Fri, 29 May 2009 00:37:52 +0000 admin http://www.circuitelectronics.info/?p=177 it's a side by side. i can't turn the defrost timer like you could on the older refrigerators. How do i get the box to go into defrost? With an electronic board? The defrost timer is located in the back near the compressor. I use to be able to use a screw driver to turn my manual defrost timer into the defrost mode. I was told once to unplug it and wait for so many seconds and turn it back on! But I forgot.. Please help.
it's self defrosting. I'm trying to diagnose why it's not working properly?
it's self defrosting. I'm trying to diagnose why it's not working properly?

]]> http://www.circuitelectronics.info/electronic-timer-circuit/whirlpool-gold-refrigerator-it-has-a-circuit-board-defrost-timer-ho-do-you-make-it-got-into-defrost/feed/ 2 Have old Sears(Kenmore) gas dryer and need electronic control or schematic? http://www.circuitelectronics.info/electronic-circuit-schematic/have-old-searskenmore-gas-dryer-and-need-electronic-control-or-schematic/ http://www.circuitelectronics.info/electronic-circuit-schematic/have-old-searskenmore-gas-dryer-and-need-electronic-control-or-schematic/#comments Thu, 28 May 2009 20:54:15 +0000 admin http://www.circuitelectronics.info/?p=175 Model # 110.77694100 76941. Ser. # M70904 502. Very old Sears (70s) but uses circuit board instead of mechanical timer. FSK printed on circuit board. We fix electronics here but have run out of luck with this. Simple electronics with one IC, and three transistors that drive three non latching relays that are separate from board. Need part but especially circuit board diagram. IC and transistors are house marked and are hard to guess. Ic is 12 or 14 pin DIP marked AMI in Korea. It even has a neon bulb on the board.

]]> http://www.circuitelectronics.info/electronic-circuit-schematic/have-old-searskenmore-gas-dryer-and-need-electronic-control-or-schematic/feed/ 1