hello, i am buying two rockford fosgate subwoofers (Rockford Fosgate P210D4)

Injection Molded Parabolic Polypropylene Cone
2" Aluminum Voice Coil Former
60oz Double Stacked Motor Structure
Optimized for Small Sealed and Vented Enclosures
250 Watts RMS/500 Watt Peak
Mounting Depth 5.6"

i am going to hook it up to this amp(Pyramid PB738GX )

500 Watts x 2 Output
1000 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
Power ON LED Indicator
Protection LED Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Blue Light Illumination Top Cover
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
Dimensions: 2.4′ H x 10.8′W x 12′ L
Pyramid 1-Year Warranty

i was wondering what the best way to wire them would be, series, parallel, or bridged. could you please tell me which one would be the best, and exactly how to wire it.
thank you very much

LEGACY 2000 WATT 2/1 CHANNEL CAR STEREO AMPLIFIER AMP
1000 Watts x 2 Output
2000 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
MOSFET PWM Power Supply
Power ON LED Indicator
LED Protection Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Blue Color LED Illuminated
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
Dimensions: 2.32' H x 12.32' W x 17' L
600W RMS

'08 KIcKER SoLoBARIC 15" L7 SUBWOOFER Subs Sub Solo
2000 watts max power handling
1000 Watts RMS power handling
89.4 DB sensitivity
frequency response: 18 – 100 K
mounting depth: 8 11/16
cut out diameter: 13-3/4
sealed box volume: 1.5 – 6.00 cubic feet
vented box 3 – 6 cubic feet
Square design gives more surface area than a normal round sub (this will sound like an 15" round sub)
Solokon 1 piece cone
Cast aluminum basket
Santoprene rubber surrounds
High Temperature Coils (this sub will never ever burn out!)

I have 1 15" Kicker Solo baric sub
2000 watts max power handling
1000 Watts RMS power handling
89.4 DB sensitivity
frequency response: 18 – 100 K
mounting depth: 8 11/16
cut out diameter: 13-3/4
sealed box volume: 1.5 – 6.00 cubic feet
vented box 3 – 6 cubic feet
Square design gives more surface area than a normal round sub (this will sound like an 15" round sub)
Solokon 1 piece cone
Cast aluminum basket
Santoprene rubber surrounds
High Temperature Coils

LEGACY LA2088 2400 WATT 2/1 CHANNEL
1200 Watts x 2 Output
2400 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
MOSFET PWM Power Supply
Power ON LED Indicator
LED Protection Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Illuminated Top Panel
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
800-1200 rms wattage

DO YOU THINK ILL NEED A CAPACITOR?

Wats The Best Ohm Independents For Subwoofers? 2ohm,4ohm,6ohm,3ohm,8ohm,Etc.? & Whats The Difference Between All Of Them & 1 More Thing Is That 2000 Watt Pyle Dryver Amp Good Or Will Itt Blow Out Eazy & Fast?

Details:
4x 200W RMS at 4 Ohms
4x 500W MAX at 4 Ohms
2x 800W MAX at 4 Ohms Bridged
4x 350W RMS at 2 Ohms
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohm Stereo Stable
Tri-Mode Capable
Gold Plated RCA Inputs
Line Outs for 1 and 2 Channel
Low Pass Filter Control
High Pass Filter Control
Remote Bass Level Control
Power and Protection LED Indicators
Red Lighting Illumination
Side Leg Mounting
THD: <0.04%.
S/N Ratio: >90dB
Input Sensitivity : 100mV ~4V
Channel Separation : >65dB
Freq. Response : 10Hz ~ 30KHz
Patent Pending
Soft Turn-on/Turn-off
Dimensions : 8.6''(W) x 2.74''(H) x 12.6''(L)

What Does Mosfet Mean?

& How Many Subs Can You Hook Up 2 That Amp?

Wats The Best Amp?

2000 Watt 4-Channel Plye Dryver

4x 200W RMS at 4 Ohms
4x 500W MAX at 4 Ohms
2x 800W MAX at 4 Ohms Bridged
4x 350W RMS at 2 Ohms
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohm Stereo Stable
Tri-Mode Capable
Gold Plated RCA Inputs
Line Outs for 1 and 2 Channel
Low Pass Filter Control
High Pass Filter Control
Remote Bass Level Control
Power and Protection LED Indicators
Red Lighting Illumination
Side Leg Mounting
THD: <0.04%.
S/N Ratio: >90dB
Input Sensitivity : 100mV ~4V
Channel Separation : >65dB
Freq. Response : 10Hz ~ 30KHz
Patent Pending
Soft Turn-on/Turn-off
Dimensions : 8.6''(W) x 2.74''(H) x 12.6''(L)

Thunder TA Series Class D Monoblock Car Amplifier
ohms: 150 watts x 1 chan.
2 ohms: 300 watts x 1 chan.
Max power output: 300 watts x 1 chan.
MOSFET power supply
Wired remote bass level control included
Thermal and short LED indicators
Tuned Bass EQ (0-12 dB bass boost at 40 Hz)
Adaptive Class D Technology: With MTX innovative approach, the amplifier’s switching energy is constantly changing and is moved away from FM radio frequency ranges as the amplifier’s load and output increases.
Thermal and short protection
StreetWires Connectors
Xtant Technologies Cooling (XTC) thermal-regulated, turbo-charged intercooler
Variable low-pass filter (at 80 or 120 Hz, 24 dB/octave)
CEA-2006 compliant amplifier
Dimensions: 12-11/16"L x 9-5/8"W x 2-1/2"H
4 or 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
1-year Sonic Electronix warranty

i have . . .

1. dual Pyle Chopper Series 15” 3600 Watt DVC Subwoofers
Titanium Injected Polypropylene Cone
Non-Fatiguing Big Rubber Suspension
Chrome-Platted Dome Steel Basket
Magnet Sealed Within Basket
Allen Key Magnet Bolts
2.5” High Temperature Dual Kapton Voice Coil
3600 Watts Peak Power
Impedance: Dual 4 Ohm
70 + 70 oz. Magnet Structure
Fs:21.2, Qms:5.0, Qes:0.90, Qts:0.75, Vas (Cu ft)5.204
SPL: 84 dB
Overall Diameter: 15.84”
Mounting Depth: 8.52”

2- dual depth charge 12″ 1000 watt subwoofers i couldnt find the details on them.

3. Pioneer In-Dash DEH-P3000IB
CD Receiver with iPod® Direct Control, 7-Way Rotary Commander and Front AUX-input
MP3, WMA, WAV, iTunes AAC Playback
XM and Sirius Radio Ready
Remote Control Included

4. Legacy 4000 Watt 2 Channel Bridgeable MOSFET amplifer
2000 Watts x 2 Output
4000 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
MOSFET PWM Power Supply
Power ON LED Indicator
LED Protection Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
Dimensions: 2.09′ H x 12.17′ W x 21′ L

5. Pyle Gear X Series 2 Channel 4000 Watt Bridgeable Mosfet Amplifier
2000 Watts x 2 Output
4000 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level ( Gain ) Control
MOSFET PWM Power Supply
Power ON LED Indicator
LED Protection Indicator
Remote Bass Boost (Included)
HI/Lo Impedance Input
Illuminated Top Panel
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-on
2 Ohm Stereo Stable
Dimensions: 2.32” H x 11.06” W x 21” L
Sold as: Unit

tell me what you think

Legacy Red LA1870 Car Audio Amplifier

2 Channel Amplification 2 x 900 Watts Output 1 x 1800 Watts Bridged Output 1800 Watts Total Output Polished Chrome Finish w/Plexiglass Panel Remote Control Bass Boost (0-+1808 @ 60Hz) Fully Adjustable Electronic Crossover Network Soft Turn On/Off Circuit 2 Ohm Stereo Stable Bridgeable Into 4 Ohms MOSFET PWM Power Supplies Variable Gain Control Remote Turn On/Off Hi/Low Level Inputs Power On LED Indicator LED Protection Indicator

The details are:

# 4×100W+2×250W RMS at 4 Ohms
# 4×250W+2×500W MAX at 4 Ohms
# 2×400W+1×900W MAX at 4 Ohms Bridged
# 4×175W+1×400W RMS at 2 Ohms
# Electronic Crossover Network
# Bass Boost Circuit
# Bridgeable at 4 Ohms
# 2 Ohm Stereo Stable
# Tri-Mode Capable
# Gold Plated RCA Inputs
# Line Outs for 1 and 2 Channel
# Low Pass Filter Control
# High Pass Filter Control
# Remote Bass Level Control
# Power and Protection LED Indicators
# Red Lighting Illumination
# Side Leg Mounting
# THD: <0.04%.
# S/N Ratio: >90dB
# Input Sensitivity : 100mV ~4V
# Channel Separation : >65dB
# Freq. Response : 10Hz ~ 30KHz
# Patent Pending
# Soft Turn-on/Turn-off
# Dimensions : 8.6''(W) x 2.74''(H) x 19.7''(L)

I have 2- 5.25"—-200 Watts (Each) 400 Watts total RMS

2-6X9————— 350 Watts (Each) 700 watts total RMS

2-10inch Sub woofers—max power=750 watts, RMS= 150 RMS watts
Voice coil diameter: 2"
4ohm inpedance

here are the subs im getting…

12″ 2200W Dual 2-Ohm Subwoofer (2)
here are the specs…
Sensitivity: 88 dB
RMS Power Range : 1100 Watts
Peak Power Handling: 2200 Watts
Impedance: Dual 2 Ohm
Low Frequency response: 26 Hz
High Frequency Response: 800 Hz
Diameter: 12 Inch

The amp i looked at was this…

4000 Watt 2 Channel High Power MOSFET Amplifier
here are the specs…
RMS Power Range : 1000-2000 Watts
Number Of Channels: 2
Maximum Power: 4000 Watts
Low Frequency response: 15 Hz
High Frequency Response: 35000 Hz
Built In Crossovers: Yes
Channel Separation: Yes

Features
2 x 1000 Watts RMS at 4 Ohms
2 x 2000 Watts Max at 4 Ohms
1 x 4000 Watts Max at 4 Ohms Bridged
2 x 1650 Watts at 2 Ohms RMS
Electronic Crossover Network
Bass Boost Circuit
Variable Phase Shift Control
2 Ohms Stereo Stable
Anti-Thump Turn-On
Soft Turn On/Off
High & Low Level Inputs
Blue Light Illuminated Crossover Control
Power & Protection LED Indicators
Advanced Protection Circuitry
Bass Boost Remote Control
T.H.D: 0.04%
S/N Ratio: 90dB
Channel Separation: 65dB
Frequency Response: 15Hz- 35kHz
Dimensions: 10.47″W x 2.46″H x 21″L

i mean people have said it will push them good, could i do better, i was thinkin that amp should deff power the hell out of those subs. i wanna go with class d mono, but i dunno which size would go good with it, any suggestions